ScreenLogic Config2.0 - App Store
You'll be able to see results in few seconds.
Publisher Description
ScreenLogic Config allows you to configure your Pentair IntelliTouch, EasyTouch or EasyTouch Lite system from the convenience of your iPhone - locally or remotely! A PC is no longer required. The connection screen for ScreenLogic Config works just like its sister app ScreenLogic Connect. ScreenLogic Config is great tool that allows pool builders and service personnel to better serve their customers.
Version History Bug fixes. 2.0 01/18/2018 Fixed a bug that caused a crash after clicking General Settings.
Please note: This app is optimized for iPhones. However, it can be installed on iPads. Make sure to change the filter in the top left to “iPhone Only” when searching for ScreenLogic Config in the App Store. ScreenLogic Config supports Portrait mode only on iPads. 1.7 11/14/2017 Bug & stability fixes including:
VSF pump programming issue resolved
Feature 1 programming issue resolved 1.6 08/01/2017 Minor bug fixes. 1.5 07/05/2017 Fixed general configuration issues reported since launch.
Please note: Time and Date sync (iPhone or iPad to IntelliTouch and EasyTouch system) is now turned off by default. Please note that if enabled on IntelliTouch systems, it will result in the filter pump turning off for approximately 15 seconds after the time and date have been set. Time and Date sync can be enabled in the Settings icon (scroll down the list for the ScreenLogic app entry). It is recommended that EasyTouch users enable this feature. This feature can be found under the Settings icon on your iPhone.
Please report any problems to pentairscreenlogic@gmail.com
We are working hard to make this app better for you! 1.4 07/02/2017 Time and Date sync (iPhone or iPad to IntelliTouch and EasyTouch system) is now turned off by default. Please note that if enabled on IntelliTouch systems, it will result in the filter pump turning off for approximately 15 seconds after the time and date have been set. Time and Date sync can be enabled in the Settings icon (scroll down the list for the ScreenLogic app entry). It is recommended that EasyTouch users enable this feature.
Also fixed other general configuration issues reported since launch.
Please report any problems to pentairscreenlogic@gmail.com
We are working hard to make this app better for you! 1.3 05/26/2016 Scheduled program support. Now you can add, remove, and modify your schedules all from the convenience of your iPhone or iPad.
Automatic Time/Date Sync. The time and date from your highly accurate iPhone and iPad will be synchronized to your EasyTouch or IntelliTouch system automatically each time you connect locally. We disable this feature for obvious reasons if you connect to a pool remotely. Enabled by default, this feature can be disabled in the iOS "Settings" icon for the SLConfig app. Look for ScreenLogic under the list of installed apps. 1.2 04/11/2016 We super-chlorinated and killed some bugs!
We are listening! Scheduling support is coming soon! 1.1 12/08/2015 1.0 11/30/2015
About ScreenLogic Config
The company that develops ScreenLogic Config is Pentair Water Pool and Spa, Inc. The latest version released by its developer is 2.0.
To install ScreenLogic Config on your iOS device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2026-10-15 and was downloaded 0 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the ScreenLogic Config as malware if the download link is broken.
How to install ScreenLogic Config on your iOS device:
- Click on the Continue To App button on our website. This will redirect you to the App Store.
- Once the ScreenLogic Config is shown in the iTunes listing of your iOS device, you can start its download and installation. Tap on the GET button to the right of the app to start downloading it.
- If you are not logged-in the iOS appstore app, you'll be prompted for your your Apple ID and/or password.
- After ScreenLogic Config is downloaded, you'll see an INSTALL button to the right. Tap on it to start the actual installation of the iOS app.
- Once installation is finished you can tap on the OPEN button to start it. Its icon will also be added to your device home screen.
Program Details
System requirements
Download information
Pricing
Version History
version 2.0
posted on 2026-10-15
Version History Bug fixes. 2.0 01/18/2018 Fixed a bug that caused a crash after clicking General Settings.
Please note: This app is optimized for iPhones. However, it can be installed on iPads. Make sure to change the filter in the top left to “iPhone Only” when searching for ScreenLogic Config in the App Store. ScreenLogic Config supports Portrait mode only on iPads. 1.7 11/14/2017 Bug & stability fixes including:
VSF pump programming issue resolved
Feature 1 programming issue resolved 1.6 08/01/2017 Minor bug fixes. 1.5 07/05/2017 Fixed general configuration issues reported since launch.
Please note: Time and Date sync (iPhone or iPad to IntelliTouch and EasyTouch system) is now turned off by default. Please note that if enabled on IntelliTouch systems, it will result in the filter pump turning off for approximately 15 seconds after the time and date have been set. Time and Date sync can be enabled in the Settings icon (scroll down the list for the ScreenLogic app entry). It is recommended that EasyTouch users enable this feature. This feature can be found under the Settings icon on your iPhone.
Please report any problems to pentairscreenlogic@gmail.com
We are working hard to make this app better for you! 1.4 07/02/2017 Time and Date sync (iPhone or iPad to IntelliTouch and EasyTouch system) is now turned off by default. Please note that if enabled on IntelliTouch systems, it will result in the filter pump turning off for approximately 15 seconds after the time and date have been set. Time and Date sync can be enabled in the Settings icon (scroll down the list for the ScreenLogic app entry). It is recommended that EasyTouch users enable this feature.
Also fixed other general configuration issues reported since launch.
Please report any problems to pentairscreenlogic@gmail.com
We are working hard to make this app better for you! 1.3 05/26/2016 Scheduled program support. Now you can add, remove, and modify your schedules all from the convenience of your iPhone or iPad.
Automatic Time/Date Sync. The time and date from your highly accurate iPhone and iPad will be synchronized to your EasyTouch or IntelliTouch system automatically each time you connect locally. We disable this feature for obvious reasons if you connect to a pool remotely. Enabled by default, this feature can be disabled in the iOS "Settings" icon for the SLConfig app. Look for ScreenLogic under the list of installed apps. 1.2 04/11/2016 We super-chlorinated and killed some bugs!
We are listening! Scheduling support is coming soon! 1.1 12/08/2015 1.0 11/30/2015
version 2.0
posted on 2026-09-03
Version History This app has been updated by Apple to prepare for watchOS 27 compatibility. No new features are included.
Bug fixes. 2.0 01/18/2018 Fixed a bug that caused a crash after clicking General Settings.
Please note: This app is optimized for iPhones. However, it can be installed on iPads. Make sure to change the filter in the top left to “iPhone Only” when searching for ScreenLogic Config in the App Store. ScreenLogic Config supports Portrait mode only on iPads. 1.7 11/14/2017 Bug & stability fixes including:
VSF pump programming issue resolved
Feature 1 programming issue resolved 1.6 08/01/2017 Minor bug fixes. 1.5 07/05/2017 Fixed general configuration issues reported since launch.
Please note: Time and Date sync (iPhone or iPad to IntelliTouch and EasyTouch system) is now turned off by default. Please note that if enabled on IntelliTouch systems, it will result in the filter pump turning off for approximately 15 seconds after the time and date have been set. Time and Date sync can be enabled in the Settings icon (scroll down the list for the ScreenLogic app entry). It is recommended that EasyTouch users enable this feature. This feature can be found under the Settings icon on your iPhone.
Please report any problems to pentairscreenlogic@gmail.com
We are working hard to make this app better for you! 1.4 07/02/2017 Time and Date sync (iPhone or iPad to IntelliTouch and EasyTouch system) is now turned off by default. Please note that if enabled on IntelliTouch systems, it will result in the filter pump turning off for approximately 15 seconds after the time and date have been set. Time and Date sync can be enabled in the Settings icon (scroll down the list for the ScreenLogic app entry). It is recommended that EasyTouch users enable this feature.
Also fixed other general configuration issues reported since launch.
Please report any problems to pentairscreenlogic@gmail.com
We are working hard to make this app better for you! 1.3 05/26/2016 Scheduled program support. Now you can add, remove, and modify your schedules all from the convenience of your iPhone or iPad.
Automatic Time/Date Sync. The time and date from your highly accurate iPhone and iPad will be synchronized to your EasyTouch or IntelliTouch system automatically each time you connect locally. We disable this feature for obvious reasons if you connect to a pool remotely. Enabled by default, this feature can be disabled in the iOS "Settings" icon for the SLConfig app. Look for ScreenLogic under the list of installed apps. 1.2 04/11/2016 We super-chlorinated and killed some bugs!
We are listening! Scheduling support is coming soon! 1.1 12/08/2015 1.0 11/30/2015
version 2.0
posted on 2026-08-21
Version History This update from Apple will improve the functionality of this app. No new features are included.
Bug fixes. 2.0 01/18/2018 Fixed a bug that caused a crash after clicking General Settings.
Please note: This app is optimized for iPhones. However, it can be installed on iPads. Make sure to change the filter in the top left to “iPhone Only” when searching for ScreenLogic Config in the App Store. ScreenLogic Config supports Portrait mode only on iPads. 1.7 11/14/2017 Bug & stability fixes including:
VSF pump programming issue resolved
Feature 1 programming issue resolved 1.6 08/01/2017 Minor bug fixes. 1.5 07/05/2017 Fixed general configuration issues reported since launch.
Please note: Time and Date sync (iPhone or iPad to IntelliTouch and EasyTouch system) is now turned off by default. Please note that if enabled on IntelliTouch systems, it will result in the filter pump turning off for approximately 15 seconds after the time and date have been set. Time and Date sync can be enabled in the Settings icon (scroll down the list for the ScreenLogic app entry). It is recommended that EasyTouch users enable this feature. This feature can be found under the Settings icon on your iPhone.
Please report any problems to pentairscreenlogic@gmail.com
We are working hard to make this app better for you! 1.4 07/02/2017 Time and Date sync (iPhone or iPad to IntelliTouch and EasyTouch system) is now turned off by default. Please note that if enabled on IntelliTouch systems, it will result in the filter pump turning off for approximately 15 seconds after the time and date have been set. Time and Date sync can be enabled in the Settings icon (scroll down the list for the ScreenLogic app entry). It is recommended that EasyTouch users enable this feature.
Also fixed other general configuration issues reported since launch.
Please report any problems to pentairscreenlogic@gmail.com
We are working hard to make this app better for you! 1.3 05/26/2016 Scheduled program support. Now you can add, remove, and modify your schedules all from the convenience of your iPhone or iPad.
Automatic Time/Date Sync. The time and date from your highly accurate iPhone and iPad will be synchronized to your EasyTouch or IntelliTouch system automatically each time you connect locally. We disable this feature for obvious reasons if you connect to a pool remotely. Enabled by default, this feature can be disabled in the iOS "Settings" icon for the SLConfig app. Look for ScreenLogic under the list of installed apps. 1.2 04/11/2016 We super-chlorinated and killed some bugs!
We are listening! Scheduling support is coming soon! 1.1 12/08/2015 1.0 11/30/2015
version 2.0
posted on 2018-01-18
This app has been updated by Apple to display the Apple Watch app icon.
Bug fixes.
version 2.0
posted on 2018-01-18
Jan 18, 2018
Version 2.0
This app has been updated by Apple to display the Apple Watch app icon.
Bug fixes.
version 1.3
posted on 2015-11-30
Disclaimer
Official App Store Link
We do not host ScreenLogic Config on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for ScreenLogic Config is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
